ID50 Series Panel - Installation, Commissioning & Configuration Manual
Commissioning
34
997-263, Issue 4
September 2002
3
Using the numeric keypad, press
6
to select the
Commissioning option and confirm using the
5
pushbutton. The Commissioning option is
automatically displayed if a Level 3 passcode was
previously entered.
If a Level 2 passcode was entered the LCD prompts:
4
Enter the correct Level 3 passcode using the numeric
keypad and confirm using the
5
pushbutton (or
press
4
to cancel the last operation).
4.7 Commissioning Tests
The following paragraphs list tests that should be performed
after configuration has been completed. A successful result
from these tests indicates that the panel is working properly.
4.7.1 Test LEDs
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.1
.
4.7.2 Test LCD
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.2
.
4.7.3 Test Zones
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.3
.
4.7.4 Test Auto High Test
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.4
.
4.7.5 Test Outputs
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.5
.
4.7.6 Test Buzzer
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.6
.
4.7.7 Test Keyboard
This procedure is described in the
ID50 Series Panel -
Operating Manual, 997-264, Section 4.8.7
.
[S1 COMM] 1:Setup
2:Circuit
3:CBE Rules
4:Zones
5:Access
×
: More
COMMISSION MODE ACCESS
Enter Level 3 Passcode: . . . .
< : BackSp
[S1 COMM] 1:Setup
2:Circuit
3:CBE Rules
4:Zones
5:Access
×
: More
6
5
