ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration
Mode
43
997-263, Issue 4
September 2002
5.5.10 Site Name
The Site Name option allows the entry of up to
20 characters to replace the Status: NORMAL display
on the LCD. To edit/change the characters:
1
From the Commissioning menu, press the
1
button
on the numeric keypad to enter the Setup menu.
2
Press the
2
/
8
buttons to step through the Setup
menus until the LCD displays the Site Name menu.
3
To edit/change the site name, press the
6
button.
The LCD display is replaced by a text editing menu
with the existing 20-characters of text on the upper
line. The current cursor position is indicated by a
flashing character.
Note:
For further information on how to edit text, refer to
Section 5.8, Zone Texts
.
4
Using the appropriate buttons, edit the text then
confirm the new text using the
5
button. The LCD
returns to the Site Name menu.
5
Press
4
to return to the Commissioning menu. All
changes are saved on exiting.
5.5.11 Control Keys
The Control Keys option allows the access level at which
the panel control keys can be operated to be changed.
To select the access level:
1
From the Commissioning menu, using the numeric
keypad press the
1
button to enter the Setup menu.
2
Press the
2
/
8
buttons to step through the Setup
menus until the Control Keys menu is displayed.
3
Press the
6
button to change the setting to level 1
(no passcode) or level 2 (user passcode).
4
Press
4
to return to the Commissioning menu. All
changes will be saved on exiting.
[Setup]
Name = < blank/existing text >
> : Change
×
: More
< : Exit
[
]
×
: Char
3
: Done
> : Next
< : Previous
u1:Delete
u3:Insert
[Setup]
Name = < blank/existing text >
> : Change
×
: More
< : Exit
EN54-2 : 7.6.1, 7.8, 8.7.1
Level 1 Control Key
access is NOT EN54
compliant
[Setup]
Control Keys Access Level = 2
> : Change
×
: More
< : Exit
[Setup] Language =
English
> : Change
×
: More
< : Exit
[Setup] Language =
English
> : Change
×
: More
< : Exit
1
or
8
2
6
5
1
or
8
2
6
