Northern Lights OWN-ADV, Installation And User Manual

Page: 66 / 91

OWN-ADV 01/12
64
Start Position (Byte) Data Length Parameter Name Description
5 1 byte Genset controller
sub-state 21 CRANKING
(remote unit displays “CRANKING”)
22: WARM UP
(remote unit displays “WARM-UP”)
23: CRANK REST (remote unit
displays “CRANK REST”)
24: NMEA2000 RUNNING (remote
unit displays NMEA2000 RUN”)
25: COOLDOWN (remote unit
displays “COOLING DOWN”)
27: IDLE RUNNING (remote unit
displays “IDLE RUNNING”)
31: IDLE COOL (remote unit displays
“IDLE COOLING”)
32: REMOTE START (remote unit
displays “RSC RUN”)
33: Front Panel Run (remote unit
displays”MANUAL RUN”)
34: MODBUS RUN (remote unit
displays “MODBUS RUN”)
6 2 byte Sub-state delay Obsolete
8 1 byte Genset controller
event code These messages will be displayed
on the second line of the LCD.
0 READING ABORT (DTC reading)
1 Low Voltage in Crank
2 Charger 1 Fault
3 Need Maintenance
4 Crank Failure
5 Charger 2 Fault
1 REQUESTING DTC
14 LAMP TEST
5 High Fuel Level
17 Low Fuel Level
18 Over Cur Latched
20 READ DTC SUCCESS
21 FULL OFF - if fuel turned off
during crank rest.
22 Low Engine RPM
23 High Engine RPM
24 High AC Current
25 High AC Voltage
26 High Engine Temp
27 Low Oil Pressure
31 NO DTC AVAILABLE
32 DM2 REQUEST FAIL
33 KEEP FUELING
35 NOT IN AUTO
10.1 NORTHERN LIGHTS PROPRIETARY (FAST PACKET)
UPDATED 6/24/11