96 Chapter 7 Port Connections for the Passport 4460
205677-F Rev 00
Use only those which are relevant to your network configuration.
For additional information, see the following:
•
•
Appendix B, “Regulatory Compliance and Telephone Company
Requirements
After the system is operating, refer to the software documentation for
configuration information (see
“Product documentation” on page 17
).
Connecting the Management Port
The Management Port, located on the front right-hand side of the Passport 4460
unit, is used to connect a PC/CPU (command port) or a modem. This connection
is needed for operating the Command Line Interface (CLI), which is used to set
and view configuration options.
The Management Port is characterized by the following:
•
Supports asynchronous operation using an RS-232 physical driver and
configured the same as the PC/AT serial port
•
Data rate is automatically selected for speeds from 2.4 Kb/s through
115.2 Kb/s
•
A management cable (207490-A) is provided to connect to a PC serial
port
•
A straight cable is required to connect to a stand-alone modem. This cable
is not provided with the unit. It can be purchased at almost any computer/
electronics store
You can connect the PC’s serial port to the Passport 4460’s Management Port,
either directly or through a modem.
Summary of Contents for Passport 4460
