manualshive.com logo in svg

Nortel Passport 4460, Hardware Reference Manual

Share
Download
Nortel Passport 4460 Hardware Reference Manual Download Page 17

17

Reference for Passport 4460 Hardware

 

About this Manual

This manual explains how to unpack, situate, cable, and power up your 
Passport* 4460 unit to get it operational. It provides technical reference 
information for all of the hardware elements of the Passport 4460 unit, including 
their features, installation instructions, and configuration possibilities. 

It is recommended that you refer to the following manuals (in addition to this 
manual) to obtain all the necessary information to get your unit up and running: 
Passport 4400 Release Notes for Release x.x, Getting Started with Passport 4460, 
and Using Passport 4400 Install Tool.

Product documentation

The Passport 4400 product documentation is delivered on the product CD and is 
also available from Nortel Networks* Web site (

www.nortelnetworks.com

).

Refer to the release notes (Passport 4400 Release Notes for Release x.x) for a list 
of available manuals for the product release you are using.

How to get help

If you purchased a service contract for your Nortel Networks product from a 
distributor or authorized reseller, contact the technical support staff for that 
distributor or reseller for assistance.

Summary of Contents for Passport 4460

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands