Chapter 1 The Passport 4460 Unit 35
Reference for Passport 4460 Hardware
You can proceed to
,” to continue your unit setup.
Warning:
Countries other than U.S.A. You should have received a
power cord with a two-prong power connector and a green-with-yellow
stripe ground wire as shown in the examples below. If the power outlet is
not grounded, contact an electrician to connect the green-with-yellow
stripe wire to a fixed earth grounding point.
Note:
To turn on the unit, plug the power cord into the front of the
chassis and into an appropriately grounded three-pin wall outlet.
Two-wire
Power Cord
Two-Prong Power Connector
To a Fixed Earth Ground Point
115/230V
MGNT
PORT
RESERVED
SERVICE
PORT
Safety
Ground
Green with Yellow Strip
Ground Wire
<0.5 ohm
Three-wire
Power Cord
Two-Prong Power Connector
115/230V
MGNT
PORT
RESERVED
SERVICE
PORT
Green with Yellow Strip
Ground Wire
<0.5 ohm
To a Fixed Earth Ground Point
Summary of Contents for Passport 4460
