Chapter 4 16 MB Flash Module 83
Reference for Passport 4460 Hardware
To install the 16 MB Flash Module:
1
Gently insert the module into the proper slot, as shown in the illustration on
the previous page. Slide the module all the way in so that it firmly mates with
the connector at the rear of the slot. The Flash eject button, located to the right
of the slot, should pop out indicating that the module was properly inserted.
2
Turn the unit on.
3
Refer to the software documentation for configuration information (see
“Product documentation” on page 17
For additional information, see the following:
•
•
Chapter 7, “Port Connections for the Passport 4460
To remove a Flash module:
1
Release the module by pushing in on the Flash eject button located to the right
of the slot.
2
Gently pull the module out of the slot.
SYSTEM
STATUS
P
O
R
T
2
P2 ST
ATUS
RST
STAT
10/100
P
O
R
T
3
PORT 1
P1 ST
ATUS
P3 ST
ATUS
EXP
ANSION
2
Summary of Contents for Passport 4460
