Configuring 802.1X port authentication
87
Variable definitions
Variable
Value
Voice VLAN Mode
Select the mode. (Options: Auto or Manual.)
Voice VLAN Security
Select to enable security filtering.
In security mode, the system filters out the traffic whose source
MAC address is not OUI within the voice VLAN, while the other
VLANs are not influenced. If security mode is disabled, the system
cannot filter traffic.
Priority
Enter the priority for the voice VLAN. (Range: 0 to 7. Default: 6.)
Trunk
Trunk number if the port is a member.
For BES50FE-12/24T only
Discovery Protocol
Select the discovery protocol type to filter out traffic. (Options:
OUI or 802.1AB.)
Configuring jumbo frames (BES50GE-12/24T PWR only)
On the BES50GE-12/24T PWR version, use the Jumbo Frames page to
enable jumbo frames to support data packets 9000 bytes in size.
Procedure steps
Step
Action
1
From the main menu, choose Configuration > Jumbo Frames.
2
Select the Enable check box to enable jumbo packet status.
—End—
Configuring 802.1X port authentication
Use these procedures to configure 802.1X port authentication on the switch.
Navigation
•
"Configuring 802.1X global settings" (page 88)
•
"Configuring 802.1X port settings" (page 88)
Prerequisites
•
The switch must have an IP address assigned.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......
