Configuring user authentication
29
Variable
Value
Trap Manager Capability
The number of trap managers supported by the BES50.
Current
List of currently configured trap managers.
Trap Manager IP Address
Type the IP address of a new management station to receive
notification messages.
Trap Manager Community
String
Specify a valid community string for the new trap manager entry.
(Range: 1 to 32 characters, case-sensitive)
ATTENTION
Nortel recommends that you define this string in the SNMP
Configuratino page for version 1 or 2c clients, or define a
corresponding user name in the SNMPv3 Users page for
version 3 clients.
Trap UDP Port
The UDP port number used by the trap manager.
Trap Version
Select the SNMP version. (Default: 1)
Trap Security Level
For trap version 3, specify one of the following security levels.
(Default: noAuthNoPriv)
•
noAuthNoPriv—SNMP communications do not use
authentication or encryption.
•
AuthNoPriv—SNMP communications use authentication, but
the data is not encrypted (only available for the SNMPv3
security model).
•
AuthPriv—SNMP communications use both authentication
and encryption (only available for the SNMPv3 security
model).
Trap Inform
For version 2c and 3 hosts, notifications are sent as inform
messages. (Default: traps are used)
•
Timeout—The number of seconds to wait for an
acknowledgment before resending an inform message.
(Range: 0 to 2147483647 centiseconds)
•
Retry times—The maximum number of times to resend an
inform message if the recipient does not acknowledge receipt.
(Range: 0 to 255)
Configuring user authentication
Use the procedures in this section to restrict management access to the
switch and to provide secure network access.
Navigation
•
Use
"Configuring user accounts" (page 30)
to manually configure
management access rights for users.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......
