36
BES50 basic configuration
Variable
Value
Logging Trap
Enter the highest level of log message to send to the remote syslog
server. For example, specify level 3 to send all messages from
level 0 to level 3 to the remote server. (Range: 0 to 7. Default: 7)
Host IP Address
Host IP List
List of remote server IP addresses that receive the syslog
messages. The maximum number of host IP addresses allowed
is five.
Host IP Address
Enter the server IP address to add to the Host IP List.
Setting application filtering
Use this procedure to set access control on the switch. The BES50 provides
security control features and controls the access modes, consequently
preventing illegal users from logging on to and accessing switches.
Procedure steps
Step
Action
1
From the main menu, choose Applications > Application Filtering.
2
For each port, select the appropriate check boxes to enable the
required access.
3
Click Submit.
—End—
Variable definitions
Variable
Value
FTP
Select to enable filtering.
SSH
Select to enable filtering.
TELNET
Select to enable filtering.
TFTP
Select to enable filtering.
HTTP
Select to enable filtering.
HTTPs
Select to enable filtering.
Configuring the system clock
Use the Applications Simple Network Time Protocol (SNTP) page to
configure the system clock manually or automatically, and to configure
daylight saving time on the BES50.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......
