64
BES50 advanced features configuration
Variable definitions
Variable
Value
Power Allocation
Enter the power budget for the switch. If devices connected to
the switch require more power than the switch budget, the port
power priority settings control the supplied power. (Range: 37
to 84 watts. Default: 84 watts)
Configuring port PoE power priorities
Use this procedure to set up the powering priorities for the ports.
Procedure steps
Step
Action
1
From the main menu, choose Configuration > PoE > Power Port
Configuration.
2
Select the Enabled check box on the required ports.
3
Select the Priority and type the required Power Allocation value.
4
Click Submit.
—End—
Variable definitions
Variable
Value
Port
The port number on the switch.
Admin Status
Select to enable PoE power on the port. Power is automatically
supplied when a device is detected on the port, providing that
the power demanded does not exceed the switch or port power
budget. (Default: Enabled)
ATTENTION
If the power required by a device exceeds the power budget
of the port, the power is not supplied.
Priority
Select the power priority for the port. (Default: low)
Power Allocation
Type the power budget amount for the port. (Default: 15400
milliwatts)
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......