Nortel BES50FE-12T PWR User Manual Download

Page: 113 / 166

Displaying system and switch information

113

Variable definitions

Variable

Value

Interface

Select to search by a port or trunk.

MAC Address

Select to search by physical address associated with this interface.

VLAN

Select to search by VLAN ID (1-4094).

Address Table Sort Key

Select sort method. (Options: Address, VLAN, or interface [port
or trunk]).

Dynamic Address Counts

The number of addresses dynamically learned.

Current Dynamic Address
Table

Lists all the dynamic addresses.

Displaying system information

This page displays the system information including a descriptive name,
location, and contact information. To open this page from the main menu,
choose Administration > System Information.

System Information page items

Item

Description

sysDescription

Description of the switch.

sysUpTime

Length of time the management agent has been operational.

sysContact

Administrator responsible for the system.

sysName

Name assigned to the switch.

sysLocation

The system location.

Displaying 802.1X global settings

The 802.1X protocol provides client authentication. To open this page
from the main menu, choose Administration > Security > 802.1X >
Information.

802.1X Information page items

Item

Description

802.1X System
Authentication Control

The global setting for 802.1X.

Displaying 802.1X port statistics

The switch can display statistics for 802.1x protocol exchanges for any port.

SMB

Using the Nortel Business Ethernet Switch 50 Series

NN47924-301

01.01

Standard

1.00

October 2006

Nortel Networks Confidential

Summary of Contents for BES50FE-12T PWR




































































































































































Search results

Summary of Contents for BES50FE-12T PWR

Reviews:

Related manuals for BES50FE-12T PWR

Brands by name

Popular brands

Nortel BES50FE-12T PWR, User Manual

Search results

Summary of Contents for BES50FE-12T PWR

Reviews:

Related manuals for BES50FE-12T PWR

Brands by name

Popular brands