26
Using the Web-based user interface
Procedure steps to manually request an IP address from the DHCP
server
Step
Action
1
From the main menu, choose Configuration > IP.
2
Click Restart DHCP to immediately request a new address.
The switch broadcasts a request for IP configuration settings on
each power reset.
—End—
Variable definitions
Variable
Value
Management VLAN
ID of the configured VLAN (Range: 1 to 4094).
This is the only VLAN through which you can gain management
access to the switch. By default, all ports on the switch
are members of VLAN 1, so a management station can be
connected to any port on the switch. However, if other VLANs
are configured and you change the management VLAN, you
can lose management access to the switch. In this case,
reconnect the management station to a port that is a member
of the management VLAN.
IP Address Mode
Select the configuration method.
If you select DHCP or BOOTP, the IP address does not function
until a reply is received from the server. The switch periodically
broadcasts a request for an IP address.
IP Address
For Static IP Address Mode, enter the IP address of the
management access VLAN interface.
Valid IP addresses consist of four numbers, 0 to 255, separated
by periods. (Default: 192.168.1.128)
Subnet Mask
For Static IP Address Mode, enter the host address bits used
for routing to specific subnets. (Default: 255.255.255.0)
Gateway IP address
For Static IP Address Mode, enter the IP address of the
gateway router between this device and management stations
that exist on other network segments. (Default: 0.0.0.0)
MAC Address
The MAC address of this switch.
Restart DHCP
Requests a new IP address from the DHCP server.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......
