Nortel BES50FE-12T PWR, User Manual

Page: 128 / 166

128 BES50 fundamentals
LED Condition Status
On Green A Power over Ethernet device is
connected to the port. PoE (1-12)
Off A Power over Ethernet device is not
connected to the port.
System status LEDs
LED Condition Status
On Green The switch is receiving power. Power
Off The switch is not receiving power.
On Green System POST completed
successfully.
Flashing Green System POST is in progress.
System
Off System POST failed.
Power supply socket
The DC power socket is for the AC power adapter. It is located on the front
panel of the switch.
Reset button
When pressed for 5 seconds, the reset button reinitializes the switch. This
returns the switch to the factory default settings if, for example, you forget
the default IP address, your user name, or your password.
Key software features
The following table lists the BES50 Series key software features.
Feature Description
Power over Ethernet Powers attached devices using IEEE 802.3af Power over Ethernet
(PoE)
Configuration backup and
restore Backup to TFTP server
Authentication Web-based user interface—User name and password, RADIUS
SNMP v1/2c—Community strings
SNMP version 3—MD5 or SHA password
Port—IEEE 802.1X, MAC address filtering
Access Control Lists Supports up to 32 IP or MAC ACLs for advanced security/filtering
purposes
DHCP client Supported
Port configuration Speed, duplex mode, and flow control
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.