Configuring event logging
33
ATTENTION
If a port is disabled (shut down) due to a security violation, it must be manually
reenabled from the Port/Port Configuration page.
Procedure steps
Step
Action
1
From the main menu, choose Administration > Security > Port
Security.
2
Select the check box in the Security Status column to enable
security for a port.
3
Click Submit.
—End—
Variable definitions
Variable
Value
Port
Port number.
Name
Descriptive text.
Security Status
Select to enable port security on the port. (Default: Disabled)
Trunk
Trunk number if port is a member.
LACP
Indicates whether Link Aggregation Control Protocol (LACP) is
enabled or disabled.
Configuring event logging
Use these procedures to control the logging of error messages, including
the type of events recorded in switch memory, and logging to a remote
System Log (syslog) server.
Navigation
•
"Configuring the system logs" (page 33)
•
"Configuring the remote logs" (page 35)
Configuring the system logs
Use the System Logs page to configure system messages logged to flash
or RAM memory.
SMB
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301
01.01
Standard
1.00
October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for BES50FE-12T PWR
Page 165: ......