Nortel BCM50e, Configuration

Page: 169 / 311

Chapter 15 Firmware and configuration file maintenance 169
BCM50e Integrated Router Configuration - Advanced
To upload the firmware and the configuration files, follow the examples in the rest
of this chapter:
FTP file upload command from the DOS prompt example
1 Launch the FTP client on your computer.
2
Enter “open”, followed by a space and the IP address of your Business Secure
Router.
3
Press
[ENTER]
when prompted for a username.
4 Enter your password as requested (the default is “PlsChgMe!”).
5
Enter “bin” to set transfer mode to binary.
6 Use “put” to transfer files from the computer to the Business Secure Router,
for example, “put firmware.bin ras” transfers the firmware on your computer
(firmware.bin) to the Business Secure Router and renames it “ras”. Similarly,
“put config.rom rom-0” transfers the configuration file on your computer
(config.rom) to the Business Secure Router and renames it rom-0. Likewise
get rom-0 config.rom transfers the configuration file on the Business Secure
Router to your computer and renames it “config.rom.” See
“Filename
conventions” on page 159 for more information about filename conventions.
7 Enter “quit” to exit the ftp prompt.
Note: The Business Secure Router automatically restarts after a
successful file upload.