Nortel BCM50e Configuration Download Page 268

Page: 268 / 311

268

Appendix H Command Interpreter

N0115789

The class can borrow

bandwidth from its parent

class when borrowing is

turned on, and vice versa.

del #

Deletes the class # and its

filter and all its children class

and their filters in WAN.

mod #

Modifies the parameters of the

class in the WAN. A bandwidth

value is optional.

Sets the class name.

Sets the class priority. The

range is between 0 (the

lowest) to 7 (the highest).

The class can borrow

bandwidth from its parent

class when borrowing is

turned on, and vice versa.

filter

lan

add #

Daddr <mask
Dmask> Dport
Saddr <mask
Smask> Sport
protocol

Adds a filter for class # in LAN.

The filter contains destination

address (netmask),

destination port, source

address (netmask), source

port and protocol. Use 0 for

items that you do not want the

filter to include.

del #

Deletes the LAN filter that

belongs to the specified LAN

class.

wan

add #

Daddr <mask
Dmask> Dport
Saddr <mask
Smask> Sport
protocol

Adds a filter for class # in

WAN. The filter contains

destination address

(netmask), destination port,

source address (netmask),

source port and protocol. Use

0 for items that you do not

want the filter to include.

del #

Deletes the LAN filter that

belongs to the specified WAN

class.

show

interface

lan

Displays the LAN interface

settings.

Table 67

Bandwidth management commands

Command

Description

Summary of Contents for BCM50e
























































































































































































































































































































Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands

Nortel BCM50e, Configuration

Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands