Nortel BCM50e Configuration Download Page 150

Page: 150 / 311

150

Chapter 14 System information and diagnosis

N0115789

Figure 75

Menu 24.2.1: System Maintenance Information

Menu 24.2.1 - System Maintenance - Information

   Name:
   Routing: IP
   RAS F/W Version: VBCM222_2.6.0.0.002 | 07/24/2006
   Country Code: 255

   LAN
   Ethernet Address: 00:13:49:00:00:01
   IP Address: 192.168.1.1
   IP Mask: 255.255.255.0
   DHCP: Server

Press ESC or RETURN to Exit:

Table 35

Fields in System Maintenance: Information

Field

Description

Name

This is the Business Secure Router system name + domain name

assigned in menu 1. For example, System Name= xxx; Domain

Name= baboo.mickey.com
Name= xxx.baboo.mickey.com

Routing

Refers to the routing protocol used.

RAS F/W Version

The release of firmware currently on the Business Secure Router

and the date the release was created.

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) address of

your Business Secure Router.

IP Address

This is the IP address of the Business Secure Router in dotted

decimal notation.

IP Mask

This shows the IP mask of the Business Secure Router.

DHCP

This field shows the DHCP setting of the Business Secure Router.

When finished viewing, press [ESC] or [ENTER] to exit.

Summary of Contents for BCM50e
























































































































































































































































































































Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands

Nortel BCM50e, Configuration

Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands