manualshive.com logo in svg

Nortel BCM50e, Configuration

Share
Download
Nortel BCM50e Configuration Download Page 166

166

Chapter 15 Firmware and configuration file maintenance

N0115789

Figure 84   

Telnet into Menu 24.6

1

Launch the FTP client on your computer.

2

Enter 

open

, followed by a space and the IP address of your Business Secure 

Router.  

3

Press 

[ENTER] 

when prompted for a username.

4

Enter your password as requested (the default is “PlsChgMe!”).

5

Enter 

bin

 to set transfer mode to binary.

6

Find the rom file (on your computer) that you want to restore to your Business 
Secure Router.

7

Use 

put

 to transfer files from the Business Secure Router to the computer, for 

example, “put config.rom rom-0” transfers the configuration file config.rom 
on your computer to the Business Secure Router. See 

“Filename conventions” 

on page 159

 for more information about filename conventions.

8

Enter quit to exit the ftp prompt. The Business Secure Router automatically 
restarts after a successful restore process.

Menu 24.6 -- System Maintenance - Restore Configuration

To transfer the firmware and configuration file to your workstation, 
follow the procedure below:

1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your Business Secure Router. Then type 
"nnadmin" and SMT password as requested.
3. Type "put backupfilename rom-0" where backupfilename is the name of
   your backup configuration file on your workstation and rom-0 is the
   remote file name on the Business Secure Router. This restores the 
configuration to your Business Secure Router.
4. The system reboots automatically after a successful file transfer

For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your Business Secure Router 
manual.

Press ENTER to Exit:

Summary of Contents for BCM50e
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands