Nortel BCM50e, Configuration

Page: 297 / 311

Appendix K Log descriptions 297
BCM50e Integrated Router Configuration - Advanced
!! Active connection allowed
exceeded
The Business Secure Router limits the number of
simultaneous Phase 2 SA negotiations. The IKE key
exchange process fails if this limit is exceeded.
!! IKE Packet Retransmit
The Business Secure Router did not receive a
response from the peer and so retransmits the last
packet sent.
!! Failed to send IKE Packet
The Business Secure Router cannot send IKE
packets due to a network error.
!! Too many errors! Deleting
SA
The Business Secure Router deletes an SA when
too many errors occur.
!! Phase 1 ID type mismatch
The ID type of an incoming packet does not match
the local's peer ID type.
!! Phase 1 ID content
mismatch
The ID content of an incoming packet does not
match the local's peer ID content.
!! No known phase 1 ID type
found
The ID type of an incoming packet does not match
any known ID type.
Peer ID: IP address type <IP
address>
The IP address type or IP address of an incoming
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays the IP address type and IP address of the
incoming packet.
vs. My Remote <IP address>
The IP address type or IP address of an incoming
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays this router’s configured remote IP address
type or IP address that the incoming packet did not
match.
vs. My Local <IP address>
The IP address type or IP address of an incoming
packet does not match the peer IP address type or IP
address configured on the local router. The log
displays the configured local IP address type of the
router or IP address that the incoming packet did not
match.
-> <symbol>
The router sent a payload type of IKE packet.
Error ID Info
The parameters configured for Phase 1 ID content
do not match or the parameters configured for the
Phase 2 ID (IP address of single, range or subnet) do
not match. Check all protocols and settings for these
phases.
Table 79 Sample IKE key exchange logs
Log Message Description