manualshive.com logo in svg

Nortel BCM50e, Configuration

Share
Download
Nortel BCM50e Configuration Download Page 255

Appendix H Command Interpreter

255

BCM50e Integrated Router Configuration - Advanced

status

Displays IP statistic counters.

udp

status

Displays the UDP status.

rip

These are the Routing Information Protocol 

commands.

accept <gateway> 

Drops an entry from the RIP refuse list.

activate  

 

Enables RIP.

merge [on|off] 

Sets the RIP merge flag.

refuse <gateway> 

Adds an entry to the RIP refuse list.

request <addr> 

[port] 

Sends a RIP request to the specified address 

and port.

reverse [on|off] 

RIP Poisoned Reverse.

status  

 

Displays RIP statistic counters.

trace  

 

Enables the RIP debug trace.

mode  

 

  

  

<iface> in [mode] 

Sets the Business Secure Router to use the 

RIP information it receives.

  

<iface> out 
[mode] 

Sets the Business Secure Router to broadcast 

its routing table.

dialin_user [show|in|out|both

|none] 

Shows the dial-in user RIP direction.

tcp

status

Displays the TCP statistic counters.

telnet

<host> [port]

Creates a Telnet connection to the specified 

host.

tftp

support

Displays whether or not TFTP is supported.

stats

Displays the TFTP statistics.

traceroute

<host> [ttl] 
[wait] [queries]

Sends ICMP packets to trace the route of a 

remote host.

xparent

join

<iface1> 
[<iface2>]

Add iface2 to the iface1’s group.

break

<iface>

Remove the specified interface from the 

ipxparent group.

urlfilter

Table 64   

IP commands

Command

Description

Summary of Contents for BCM50e
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands