Nortel BCM50e, Configuration

Page: 80 / 311

80 Chapter 6 Remote Node setup
N0115789
Traffic Redirect setup
Configure parameters that determine when the Business Secure Router forwards
WAN traffic to the backup gateway using
Menu 11.1.5 — Traffic Redirect
Setup .
Figure 26 Menu 11.1.5: Traffic Redirect setup
Table 18 describes the fields in Figure 26 .
Menu 11.1.5 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 15
Check WAN IP Address= 0.0.0.0
Fail Tolerance= 3
Period (sec)= 5
Timeout (sec)= 3
Press ENTER to Confirm or ESC to Cancel:
Table 18 Menu 11.1.5: Traffic Redirect setup
Field Description Example
Active Press [SPACE BAR] and select Yes (to enable) or No (to
disable) traffic redirect setup. The default is No .
Yes
Configuration:
Backup
Gateway IP
Address
Enter the IP address of your backup gateway in dotted
decimal notation.
The Business Secure Router automatically forwards traffic
to this IP address if the Business Secure Router Internet
connection terminates.
0.0.0.0
Metric Enter a number from 1 to 15 to set this route’s priority
among the Business Secure Router routes. The smaller
the number, the higher priority the route has.
15
(default)