Nortel BCM50e, Configuration

Page: 30 / 311

30 Chapter 1 Getting to know your BCM50e Integrated Router
N0115789
Physical features
4-Port switch
A combination of switch and router makes your BCM50e Integrated Router a cost
effective and viable network solution. You can connect up to four computers or
phones to the Business Secure Router without the cost of a switch. Use a switch to
add more than four computers or phones to your LAN.
Autonegotiating 10/100 Mb/s Ethernet LAN
The LAN interfaces automatically detect if they are on a 10 or a 100 Mb/s
Ethernet.
Autosensing 10/100 Mb/s Ethernet LAN
The LAN interfaces automatically adjust to either a crossover or straight through
Ethernet cable.
Number of concurrent IKE Phase 1 Security Associations:
These correspond to the gateway policies.
10
Number of concurrent IPSec VPN tunnels (Phase 2 Security
Associations):
These correspond to the network policies and are also monitorable and
manageable. For example, five IKE gateway policies could each use 12
IPSec tunnels for a total of 60 phase 2 IPSec VPN tunnels. This total
includes both branch office tunnels and VPN client termination tunnels.
60
Number of IP pools can be used to assign IP addresses to remote users
for VPN client termination
3
Number of configurable split networks for VPN client termination 16
Number of configurable inverse split networks for VPN client termination 16
Number of configurable subnets per split network for VPN client
termination
64
Table 1 Feature Specifications
Feature Specification