Nortel BCM50e, Configuration

Page: 281 / 311

Appendix J Enhanced DHCP option commands 281
BCM50e Integrated Router Configuration - Advanced
where:
Use this command to set the Nortel BCM50 DHCP to assign VoIP server and VLAN
settings to Nortel’s IP Telephone 2004. You must also configure the VoIP server and
VLAN settings assignment, see the
“Nortel i2004 IP phone options section.
This command sets DHCP option 192.
Nortel i2004 IP phone options
Use these commands to add site-specific options to the DHCP server’s offer messages that
it sends to Nortel’s i2004 IP telephone.
VoIP server settings assignment
Syntax:
ip dhcp <interface> server voipserver [id: 1|2] [server IP] [port (1~65535)]
[retry count (0~255)]
where:
<interface>
Specify an interface on the device. Currently you can use this
command with the LAN interface (enif0).
[0|1]
Use “1” to have the Nortel BCM50 assign VoIP server (DHCP
option 128) and VLAN (DHCP option 191) settings to Nortel’s
IP Telephone 2004.
Use “0” to not have the Nortel BCM50 assign VoIP server and
VLAN settings to Nortel’s IP Telephone 2004.
<interface>
Specify an interface on the device. Currently you can use
this command with the LAN interface (enif0).
[id: 1|2]
This identifies whether this configuration is for assigning
information about the first or second VoIP server.
[server IP]
This is the IP address of the VoIP server in dotted decimal
format.