manualshive.com logo in svg

Nortel BCM50e, Configuration

Share
Download
Nortel BCM50e Configuration Download Page 251

Appendix H Command Interpreter

251

BCM50e Integrated Router Configuration - Advanced

load

Saves UPnP information.

reserve

[0:deny/1:permit]

save

Saves UPnP information.

m50Enable

[yes|no]

 

Turns Nortel’s proprietary DHCP 

enhancement feature on or off.

socket

Displays the system socket’s ID #, 

type, control block address (PCB), IP 

address and port number of peer 

device connected to the socket 

(Remote Socket) and task control block 

(Owner).

filter

netbios

disp

Displays the current NetBIOS filter 

modes.

config <0:Between LAN and 
WAN/ 3: IPSec Pass through/
4: Trigger Dial> <on|off>

Sets NetBIOS filters.

roadrunner

debug

<level>

Enables or disables Road Runner 

service.
0: disable (default)1: enable

display

<iface name>

Displays Road Runner information 

iface-name: enif0, wanif0

restart

<iface name>

Restarts Road Runner.

ddns

debug

<level>

Enables or disables DDNS service.

display

<iface name>

Displays DDNS information.

restart

Restarts DDNS.

logout

This command has no effect.

cpu

display

Displays the CPU utilization.

Table 61   

Sys commands

Command

Description

Summary of Contents for BCM50e
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands