manualshive.com logo in svg

Nortel BCM50e, Configuration

Share
Download
Nortel BCM50e Configuration Download Page 248

248

Appendix H Command Interpreter

N0115789

display 

Shows all runtime Temporarily Open 

Sessions.

debug 

Turns TOS debug message on or off.

listPerHost 

Displays all hosts session counts.

sessPerHost

Sets the session per host limit.

timeout

display

Displays all TOS (Temporarily Open 

Session) timeout information.

icmp

Sets the ICMP session idle timeout 

value.

igmp 

Sets the IGMP session idle timeout 

value.

tcpsyn

Sets the SYN TCP session idle timeout 

value.

tcp

Sets the TCP session idle timeout 

value.

tcpfin

Sets the TCP FIN session idle timeout 

value.

udp

Sets the UDP-session idle-timeout 

value.

gre

Sets the GRE-session idle-timeout 

value.

esp

Sets the ESP-session idle-timeout 

value.

ah

Sets the AH-session idle-timeout value.

others

Sets the idle-timeout value for other 

sessions.

trcdisp

parse, brief, disp

Sets the level of detail that should be 

displayed. “parse” displays the most 

detail and “disp” displays the least.

trclog

switch

[on|off]

Enables or disables the system trace 

log or displays the current setting.

online

[on|off]

Enables or disables the trace log 

onscreen display (for example, in the 

Telnet management window).

Table 61   

Sys commands

Command

Description

Summary of Contents for BCM50e
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands