Nortel BCM50e Configuration Download Page 246

Page: 246 / 311

246

Appendix H Command Interpreter

N0115789

disp

Displays the error log.

online

Turns the error log online display on or

off.

load

Loads the log settings buffer. Use this

command before you configure the log

settings. Use

sys logs save

after

you configure the log settings.

mail

alertAddr [mail address]

Sends alerts to this e-mail address.

clearLog [0:no/1:yes]

Enables the switch to clear the log after

sending logs via e-mail.

display

Displays the logs and alerts mail

settings.

logAddr [mail address]

Sends logs to this e-mail address.

schedule display

Displays the mail schedule.

schedule hour [0-23]

Sets the hour to send logs.

schedule minute [0-59]

Sets the minute to send the logs.

schedule policy [0:full/
1:hourly/2:daily/3:weekly/
4:none]

Sets the mail schedule policy.

schedule week [0:sun/1:mon/
2:tue/3:wed/4:thu/5:fri/
6:sat]

Sets the day of the week to send

weekly logs.

server [domainName/IP]

Sets the domain name or IP address of

the mail server to which the logs are

sent.

subject [mail subject]

Sets the log e-mail’s subject.

auth

Enables or disables SMTP

authentication.

user

Sets the SMTP authentication

username.

passwd

Sets the SMTP authentication

password.

save

Saves the log settings from the buffer.

syslog

active [0:no/1:yes]

Enables or disables syslog logging.

Table 61

Sys commands

Command

Description

Summary of Contents for BCM50e
























































































































































































































































































































Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands

Nortel BCM50e, Configuration

Search results

Summary of Contents for BCM50e

Reviews:

Related manuals for BCM50e

Brands by name

Popular brands