Nortek Reznor FSE 100, Installation, Commissioning, Servicing

Page: 13 / 53

Reznor, FSE, Installation Manual, EN 2020-02, D301160 Iss H
Fixed protection
In order to avoid accidental contact with
the movable parts of the machine, check if
the following fixed protections have been
properly installed:
• Grille on air intake.
• Appliance infill panels.
• Burner casing.
Structure
Legend
1. Secondary heat exchangers
2. Combustion chamber
3. Rear flue manifold
4. Front flue manifold
5. Heat exchanger inspection door
6. Flue connection
7. Burner mounting
8. Flame spy hole
9. Fan
10. Fan motor
11. Electrical panel
12. Fan-limit tri-thermostat
13. Smartcom controller
Figure 1. Component layout
Figure 1 cont. Component layout
Figure 2. Heat exchangers models
60–300
Figure 3. Heat exchanger model 40