Norsonic nor118 Page 87 Instruction Manual Download

Page: 87 / 116

Chapter 14

Memory handling

Norsonic Nor118

User Guide

Keeping track of the measurement
mode the file was stored in.

e differ-

ent modes are indicated in the file list as follows:

Clearing folders or the entire memory

To clear a folder:

• Select it using the cursor keys and press enter. You

will now be prompted to select between clearing the

.. (i.e. the current folder or directory,  

in the entire memory or to  the entire memory.

e option  is also included to avoid unintended

erasures. If so, use  to leave the menu.

You cannot delete the file that you are displaying. ere-

fore, in order to clear this file press  before you enter

the  menu.

All file names (i.e. file num-

bers) have a letter as suffix. is

letter indicates the measure-

ment mode:

means frequency analysis, but no profile

means that the file contains a simple global

measurement, but no frequency analysis and

no profile.

means a multispectrum measurement

means a measurement made in sound power

mode.

means a reverberation time measurement

means a profile measurement with or without

a frequency analysis

The menus for clearing files, folders

and the entire memory

The uppermost text line in the display which file has
been retrieved. The little R denotes Recalled, just like S
denotes Stored

Summary of Contents for nor118





















































































































Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands

Norsonic nor118, Instruction Manual

Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands