Norsonic nor118 Page 5 Instruction Manual Download

Page: 5 / 116

Norsonic Nor118

User Guide

Finding the information you need

on the basic use of the instrument appears in both these

chapters to avoid “page-riding”. Hence, if you read both

chapters you will find a repetition of certain issues.

e third of these chapters deals with the basic level

vs. time extension. If you are going to make level vs. time

measurements you should read the two preceding measure-

ment description chapters first, to get a good understanding

of the instrument’s behaviour. e enhanced version of the

level vs. time mode is described in the following chapter,

but we do recommend that you read both the L(t) chapters

to get a good overview.

New in this version of the instrument is the multispectrum

which allows the level vs. time to log complete spectra as an

f(t). is feature made it natural to include reverberation

time, which has been granted its own chapter.

Sound power calculation based on sound pressure level

measurements is also new in this version. Although a fairly

thorough description is given, we recommend that you get

yourself a copy of the applicable standard.

Note that the instruction manual describes a fully

equipped instrument. Your version may not have all the

optional extensions available. Extensions may, however,

with a few exceptions be installed as retrofit any time.

Our objective with this manual has been to address

your goals and needs. Please let us know how well we

succeeded!

hank you for choosing Norsonic! The Nor has

been designed to give you many years of safe, reliable

operation.

Your approach to the Nor118 documentation depends on

what you want to do and how much you already know.

e

Nor118 User Guide

has been divided into eighteen

chapters or sections plus index. Each chapter provides dif-

ferent information. Depending on your requirements and

your familiarity with sound measurements as such, you

may find that you use some parts of this manual often and

others not at all.

e very first chapter acquaints you with the Nor118 and

describes its features and possibilities. is may be a good

starting point so that you know more about what to look

for and what you maybe should learn more about.

e next section provides a closer look at the instrument

with a presentation of all major parts and the keys of the

keyboard.

Calibration is a vital point ensuring that your measure-

ments are sufficiently correct for the purpose. erefore, a

separate chapter has been devoted to this.

How to measure with the Nor118 is described in the

following chapters. e first measurement description

outlines the use of the Nor118 as a simple sound level

meter. e second description extends the description to

also include frequency analysis. Some general information

Summary of Contents for nor118





















































































































Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands

Norsonic nor118, Instruction Manual

Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands