Norsonic nor118 Page 4 Instruction Manual Download

Page: 4 / 116

Norsonic Nor118

User Guide

Nor118 User Guide – November 2002 Edition
Editor:

Gustav Bernhard Ese, Dipl. Ing.

Text and Layout:

Gustav Bernhard Ese

Production Notes:

This manual was created electronically

on the Microsoft™ Windows 2000 platform using Adobe

InDesign. Artwork was made using Adobe PhotoShop and

Macromedia FreeHand. Proofs were made on Epson Stylus

Color 3000 using Adobe PressReady, HP LaserJet 4050PS

and 4MV PostScript printers. RIP and final printout were

made at Allkopi, Høvik, Norway.

We used Adobe Caslon Pro (open type) and Helvetica

typefaces in this User Guide.
Norsonic is a registered trademark of Norsonic AS. All

other brand or product names are trademarks or registered

trademarks of their respective companies.
Every effort has been made to supply complete and

accurate information. However, Norsonic AS assumes no

responsibility for the use of – nor for the consequential dam-

ages of the use of – this information and/or the instrumenta-

tion described herein. Furthermore Norsonic AS assumes

no responsibility for any infringement of the intellectual

property rights of third parties, wherever applicable, which

would result from such use.
Norsonic AS reserves the right to amend any of the infor-

mation given in this manual in order to take account of new

developments.
If you wish to communicate with us, please feel welcome.

Our address is:

Norsonic AS, P.O. Box 24, N-3421 Lierskogen, Norway
Find us on the web:

www.norsonic.com

Tel:

+47 3285 8900,

Fax:

+47 3285 2208

e-mail:

[email protected]

Summary of Contents for nor118





















































































































Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands

Norsonic nor118, Instruction Manual

Search results

Summary of Contents for nor118

Reviews:

Related manuals for nor118

Brands by name

Popular brands