Norsonic nor118 Instruction Manual Download Page 88

Page: 88 / 116

Chapter 15

Making hardcopies

Norsonic Nor118

User Guide

Making

hardcopies

     to a printer for

documentation. The instrument’s print drivers

support the following printer types:

•   class of printers

•   class of printers

•  range of printers

• Most numerical printers

e range of printers commercially available is an ever

changing issue. erefore what was true by the time of

design of the printer drivers used in Nor118 may not be

true the day you read this. Output from the Nor118 is

purely numerical, hence almost any numerical printer

should be able to produce the output text on the paper.

e difference between the printers lies mostly in such

things as character size and width, which determines the

number of characters that fit on a page.

erefore we recommend that you make a few experi-

ments with the setup and your printer to find the driver

that produces the best-looking printouts.

Setting up for printouts

e setup for printouts is made in the IO/Print menu.

To set up for printing:

Press  > 1 (Instr) > 2 (IO/Print).

Set the    to  (set it to 

when not used to save batteries); set a baud rate your

printer can handle – be sure to use the same setting

in the printer; experiment with the printer type (see

above) and unless you’re in need of printouts with

German text, set language setting to .

Press

SETUP

>1>2 to produce this menu

Summary of Contents for nor118





















































































































Search results

Summary of Contents for nor118

Reviews:

Norsonic nor118, Instruction Manual, Page: 88 / 116

Search results

Summary of Contents for nor118

Reviews: