Nordson Spectrum II S2-900 C Series, Installation, Operation And Maintenance Manual

Page: 130 / 262

5-6 Calibration and Adjustment
3. Click on
Calibrate
.

The Calibration Window opens (Figure 5-5).
Figure 5-5 Calibration Window
4. Position the camera over a fiducial and adjust the light level to obtain a good image
contrast. See
4.8.2 Lighting and Color Adjustment
.
5. If the image is not in focus, focus the camera as described in 5.5 Focusing the Camera .
6. Click on
Next
.
7. Verify that the fiducial image is centered and click on
Next
.

The Vision System will take a snap image of the fiducial.
8. If the fiducial is acceptable, select
Next
. If not, select
Prev
and define a new fiducial.

NOTE The fiducial should fit inside the green square on the camera image.
9. After the camera calibration sequence is complete, verify that the X and Y values are
relatively close (within 10 increments) of each other. If there is a large difference, repeat the
calibration process and define a new fiducial.
10. If the results are satisfactory, select
Done
to save the calibration results.

NOTE
Machine Offsets must be performed after calibrating the camera. For more information,
refer to the Fluidmove User Guide or Online Help.