Nordson Spectrum II S2-900 C Series, Installation, Operation And Maintenance Manual

Page: 114 / 262

4-42 Operation
4. Move the cursor to the beginning of the END USE CONVEYOR command.
5. Click on the
Dispense Elements
button on the Program Commands toolbar.

A Teach Window opens.
6. Select the element you want to program from the Dispensing Elements toolbar and follow
the screen prompts.
7. Click on
Done
when you are finished.

The dispensing command should be inserted between the Use Conveyor 1 and
End Use Conveyor commands.
8. Save the program.

A sample program is shown in Figure 4-37.
Dual_Lane Workpiece
1 USE CONVEYOR 1:
2 DO: C1LINE AT (2.032, 4.769)
3 END USE CONVEYOR:
4 USE CONVEYOR 2:
5 DO: C2DOT AT (4.964, 5.501)
6 END USE CONVEYOR:
7 END:
1
Figure 4-37 Sample Dual Conveyor Program

NOTE
Conveyor Block Commands can only be placed in the Workpiece Pattern.