Nordson Spectrum II S2-900 C Series, Installation, Operation And Maintenance Manual

Page: 16 / 262

1-2 Introduction
1.4 Manuals
The S2-900 Series Dispensing System arrives with manuals for installation and operation of major system
components and software. For some system components, you may receive Original Equipment
Manufacturer (OEM) manuals. Generally, these OEM manuals are only needed for reference and
advanced troubleshooting. Consult only Nordson ASYMTEK manuals unless directed to do otherwise by
the manuals themselves or by Nordson ASYMTEK Technical Support.
1.5 Training
Nordson ASYMTEK offers quality training for all current products on-site and at our Regional Support
Centers around the world. In addition, we offer training for products no longer sold, but currently
supported. Training for products no longer sold is performed at your site, on your equipment. We do not
offer training for products no longer supported.
Training courses for current products are held at the Nordson ASYMTEK headquarters in Carlsbad,
California, USA and in Amherst, Ohio, USA and are conducted in a classroom and lab environment.
On-site training at a Nordson facility offers several benefits: students are free from the distractions of
work and get actual hands-on time with the machines. Students rebuild machine subassemblies,
troubleshoot real problems and learn a variety of setup techniques.
Nordson ASYMTEK training for current products is also offered in our worldwide Regional Support
Centers located in Duerne, Netherlands; Seoul, Korea; Taipei, Taiwan; Tokyo, Japan; Shanghai, China;
Penang, Malaysia; and Singapore. Training conducted at these locations is based on equipment
availability. Training in India, Philippines, and Thailand is available through our distributor network only.
1.5.1 Student Certification
Upon successful completion of the training course, the student is issued a Certificate of Completion.
1.5.2 Student Registration
To request training, download the “Training Request Form” from the Nordson ASYMTEK website
www.nordsonasymtek.com . Return the completed form to asymtektraining@nordson.com . You will be
contacted within two business days.
1.6 Supported Dispensing Fluids
The S2-900 was designed for dispensing the following materials. Contact Nordson ASYMTEK for
materials not listed.
•
Flip Chip & Chip Scale Package (CSP) Underfill materials
•
Dam and Fill Encapsulation materials
•
LED Encapsulation materials (silicon based)
•
Lid Seal materials
• Reagent dispense materials
•
Silicones

NOTE It is the responsibility of the end-user to consult the Safety Data Sheet for all fluids used
with the dispensing system. The SDS provides material usage instructions, disposal
instructions, and safety precautions.