Nordson Spectrum II S2-900 C Series, Installation, Operation And Maintenance Manual

Page: 18 / 262

1-4 Introduction
1.9 S2-900 Series Features
Table 1-2 Standard/Optional Features
System Features

= Standard

= Option
NA = Not Available
ESR = Special Order
S2-900 S2-900P S2-9XXC
Computer and Software
Laptop with Windows Operating System
  
Fluidmove 6.X or later
  
Conveyor
Standalone / In-Line Conveyor
  
Stations per lane: 1 (2 or 3 stations are options)
  
Dual Lane Option
 
ESR
Rail Clamps

NA NA
Lift Table
  
Multimove Conveyor Capability
  
Conveyor Belts (6-mm flat belt, 4-mm flat belt, 3-mm O-ring)
  
Dispense Tip Position and Maintenance
Service Station: Dispense Tile, Tactile Z Sensor, Vacuum Purge Station
  
Integrated Weight Scale for closed-loop process controls
  
Mass Flow Calibration (MFC) for needle dispensing
  
Calibrated Process Jetting (CPJ) for jet dispensing
  
Laser Height Sensor
High-accuracy: 200µm diameter circle (small dot)
Highest accuracy: 700 x 200µm oval
  
Laser Height Sensor for Transparent, Reflective Surfaces
  
Tactile Height Sensor
  
Programmable Tilt and Rotate
 
ESR
Dispensing Valves
IntelliJet
 
NA
Jet Valves (DispenseJet, NexJet)
  
DV-Series Valves (See 1.10.7 Dispensing Valves )
  
Heater Options and Control
Needle Heater
  
Substrate Heating: contact or impingement
  
Controlled Process Heat (CpH
™
)
  
Process Development Hot Plate (requires large lift table)
  
Vision and Lighting
Vision: Auto Pattern Recognition/Digital Camera
  
Monocle™ Vision Package with 5-axis On/Off axis lighting
  
Part Illumination: Red/Blue/Green
  
Low-Angle Off-Axis Red Light
  
Fids-on-the-Fly ™
  