5 Parameters
BU 0505 EN-3021
129
P429
Fixed frequency 1
(Fixed frequency 1)
P
-400.0 ... 400.0 Hz
{ 0.0 }
Following actuation via a digital input and enabling of the FI (right or left), the fixed frequency is
used as a setpoint. A negative setting value will cause a direction change (based on the
Enable
rotation direction
P420 – P425, P470).
If several fixed frequencies are actuated at the same time, then the individual values are added
with the correct sign. This also applies to combinations with the jog frequency (P113), analog
setpoint (if P400 = 1) or minimum frequency (P104).
The frequency limits (P104 = f
min
, P105 = f
max
) cannot be over or undershot.
If none of the digital inputs are programmed for enable (right or left), the simple fixed frequency
signal results in an enable. A positive fixed frequency corresponds to a right enable, a negative to
a left enable.
Pos: 266 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P430 – Festfrequenz 2 @ 0\mod_1328000763221_388.docx @ 10112 @ @ 1
P430
Fixed frequency 2
(Fixed frequency 2)
P
-400.0 ... 400.0 Hz
{ 0.0 }
For a description of the function of the parameter, see
P429
>
Fixed frequency 1
<
Pos: 267 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P431 – Festfrequenz 3 @ 0\mod_1328000901549_388.docx @ 10135 @ @ 1
P431
Fixed frequency 3
(Fixed frequency 3)
P
-400.0 ... 400.0 Hz
{ 0.0 }
For a description of the function of the parameter, see
P429
>
Fixed frequency 1
<
Pos: 268 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P432 – Festfrequenz 4 @ 0\mod_1328000961174_388.docx @ 10158 @ @ 1
P432
Fixed frequency 4
(Fixed frequency 4)
P
-400.0 ... 400.0 Hz
{ 0.0 }
For a description of the function of the parameter, see
P429
>
Fixed frequency 1
<
Pos: 269 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P433 – Festfrequenz 5 @ 0\mod_1328001008409_388.docx @ 10181 @ @ 1
P433
Fixed frequency 5
(Fixed frequency 5)
P
-400.0 ... 400.0 Hz
{ 0.0 }
For a description of the function of the parameter, see
P429
>
Fixed frequency 1
<
Pos: 271 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P434 – Funktion Digitalausgänge [SK 54xE] @ 0\mod_1328001103519_388.docx @ 10227 @ @ 1
P434
[-01]
...
[-05]
Digital output function
(Digital output function)
P
0 ... 40
{ [-01] = 1 }
{ [-02] = 7 }
all other { 0 }
Up to 5 outputs (2 of which are relays) are available. These can be freely programmed with digital
functions. These can be seen in the following table.
[-01] = Binary output 1 / MFR1
,
Relay output 1
:
external brake
, (default),
Terminal 1/2
[-02] = Binary output 2 / MFR2
,
Relay output 2
:
Error
, (default),
Terminal 3/4
[-03] = Binary output 3 / DOUT1
,
Digital output 1
:
no function
, (default),
Terminal 5
[-04] = Binary output 4 / DOUT2
,
Digital output 2
:
no function
, (default),
Terminal 7
1
[-05] = Binary output 5 / DOUT3
,
Digital output 3
:
no function
, (default),
Terminal 27
1
Outputs 1 and 2 (MFR1: Control terminals 1/2 and MFR2: Control terminals 3/4):
The
settings 3 to 5 and 11 act with a 10% hysteresis, i.e. the relay contact closes (Function 11 opens)
when the limit value is reached and opens (function 11 closes) when a 10% smaller value is
undershot. This behaviour can be inverted with a negative value in P435.
1
Digital input 7 (DIN7) can also be used as digital output 3 (DOUT3 / Binary output 5). It is recommended that either an input
function (P420 [-07] or an output function (P434 [-05]) is parameterised. However, if and input function and an output function
are parameterised, a High signal from the output function will result in the activation of the input function. This IO connection is
hence used as a kind of "flag". This also applies for digital input 8 (DIN8) and digital output 2 (DOUT2 / binary output 4).
Pos: 272 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P400-P499/Parameter P434 – Liste der Funktionen der Relais- und digitalen Ausgänge @ 0\mod_1328001177097_388.docx @ 10250 @ 5 @ 1
Summary of Contents for NORDAC PRO SK 5 E-111 CP Series
