![NorAM 65E Turbo Operator'S Manual Download Page 8](http://html1.mh-extra.com/html/noram/65e-turbo/65e-turbo_operators-manual_1700493008.webp)
1
NORAM 65ET GRADER
0-4
Sa
fety
0
3. Always use external supports when working under
any linkage or raised part of the machine. Lower
implements to the ground whenever possible.
4. The cooling system operates under pressure that is
controlled by the radiator cap. It is dangerous to
remove the cap while the system is hot. Always turn
cap slowly to the first stop and allow pressure to
escape before removing the cap entirely.
5. The hydraulic system operates under pressure that
is controlled by the reservoir cap. Always turn cap
slowly to relieve pressure before removing cap
entirely or disconnecting any hydraulic lines.
6. Do not smoke while refueling the vehicle. Keep any
type of open flame away. Wait for the engine to cool
before refueling.
7. Keep vehicle, particularly brakes and steering,
maintained in a reliable and satisfactory condition to
ensure your safety and comply with legal
requirements.
8. To prevent fire or explosion, keep open flames
away from battery or cold weather starting aids. To
prevent sparks which could cause explosion, use
jumper cables according to instructions.
9. Do not attempt to service air conditioning system,
if equipped. It is possible to be severely frostbitten or
injured by escaping refrigerant. Special equipment
and instruments are required to service air
conditioning system. See an authorized dealer for
service.
10. Stop the engine before performing any service on
the vehicle.
11. Always turn master switch to the "off" position
when maintaining or servicing machine.
12. When using compressed air for cleaning parts,
use safety glasses with side shields or goggles. Limit
pressure to 30 psi.
13. Escaping diesel/hydraulic fluid under pressure
can penetrate skin causing serious injury.
14. DO NOT use your hand to check for leaks. Use a
piece of cardboard to search for leaks.
· Stop engine and relieve pressure before connecting
or disconnecting lines.
· Tighten all connections before starting engine or
pressurizing lines.
· If fluid is injected into skin, obtain medical
attention immediately or gangrene may result.
15. Do not modify or alter or permit anyone else to
modify or alter the vehicle or any of its components
or any functions without first consulting an
authorized dealer.
16. Fuel oil in the injection system is under high
pressure and can penetrate the skin. Unqualified
persons should not remove or attempt to adjust a
pump, injector nozzle or any other part of the fuel
injector system. Failure to follow these instructions
can result in serious injury.
17. Continuous long-term contact with used engine
oil may cause skin cancer. Avoid prolonged contact
with used engine oil. Wash skin promptly with soap
and water.
18. Wheels can be very heavy. Handle with care and
ensure, when stored, that they cannot fall and cause
injury.
19. When checking tire inflation pressure, stand to
the side in case of explosion.
20. Never use reconditioned tire rims.
21. If brakes are to be serviced, the machine must be
secured to prevent movement.
22. Dispose of all drained fluids and removed filters
properly.
Summary of Contents for 65E Turbo
