NorAM 65E Turbo, Operator'S Manual

Page: 23 / 118

NORAM 65ET GRADER
1-11
Gene
ral Informa
tion
1
CATERPILLAR STYLE CONTROL CONFIGURATION
NOTE:
Only applies to machines with factory installed CAT control option.
Left Side Moldboard Height Control Lever
The left side moldboard height control lever, 1, raises, lowers or
floats the left side of the moldboard.
Side Shift Control Lever
NOTE:
On machines equipped with hydraulic moldboard tilt,
the lever changes between moldboard side shift and moldboard tilt
control according to the position of the blade pitch toggle switch
on top of the steering console.
The side shift control lever, 2, shifts the moldboard side to side or,
if the blade pitch switch is activated, changes the pitch of the
moldboard.
Circle Rotate Control Lever
CAUTION:
ROTATING THE MOLDBOARD CAN CAUSE CONTACT WITH THE FRONT TIRES AND
THE REAR MODULE. USE CAUTION AT EXTREME MOLDBOARD ANGLES TO PREVENT DAMAGE
TO THE TIRES OR ARTICULATION PINS.
The circle rotate control lever, 3, rotates the circle and, consequently, the moldboard.
Circle Shift Control Lever
NOTE:
On machines equipped with the adjustable saddle option the lever changes between circle shift and saddle
pin according to the position of the saddle pin switch.
The circle shift control lever, 4, moves the circle side to side. If the saddle pin switch is activated, the lever controls
the saddle lock pin.
NOTE:
On machines with the adjustable saddle option, the pin and the hole in the saddle do not self align. Rotate
the saddle using other controls to align pin and hole in saddle.