Nitto DURA PRINTER SL, Instruction Manual

Page: 31 / 98

BEFORE OPERATION
1-18
3
Pull the print head locking lever
toward you and then raise the
arm unit.
4
Pass the fan-folded paper from
the slit in the rear of the top
cover.
Position the paper behind the printer in such
a way that the labels will advance straight
through the printer during printing.
5
Adjust the label holders to match
the width of the label roll.
Squeeze the label holder tabs to release
them. Then slide the tabs to the correct
position, depending on the label width.
Refer to the scale to find the correct position.
If the gap between
the label holder and
the label roll is too
large, the labels may
drift, resulting in
abnormal printing.