PREFACE
I
PREFACE
We appreciate your using Nitto Denko’s DURA PRINTER SL.
The DURA PRINTER SL is a thermal transfer label printer, which prints on and makes use of proprietary labels and
ribbons.
This manual explains how to manage and maintain the DURA PRINTER SL, maintaining it in optimum condition for as
long a period as possible. Please read through this “Instruction Manual” before use.
Please store the manual carefully when not in use.
The DURA PRINTER SL can be used in either of the following two ways.
1
)
After a Windows printer driver has been installed on a PC.
After the DURA PRINTER SL printer driver is installed on a PC, printing can be carried out via any Windows
application capable of printing image data.
For driver installation and setup procedures, refer to the “DURA PRINTER SL Printer Driver Instruction Manual”
on the accompanying CD.
Label printing software for FA, “Label Studio”, is available and makes label printing easier.
2
)
By transmitting exclusive commands (character data) from a PC or other devices to the printer and using fonts and
barcodes stored in the printer’s memory.
For information on the commands, refer to the “DURA PRINTER SL Command Reference Manual” on the
accompanying CD; for information on the interface required when issuing the commands, refer to the “DURA
PRINTER SL Interface Manual”. It is necessary for proper printing that the operator familiarize himself/herself with
the commands before transmitting these to the printer.
* The accompanying CD “DURA PRINTER SL Setting Tool” contains the following.
Programming the “DURA PRINTER SL Setting Tool”, driver, and various instruction manuals
For a summary, refer to “Chapter 6 About the DURA PRINTER SL Setting Tool”.
●
Copying or reproducing this manual, in whole or in part, without our prior consent is prohibited.
●
There may be some minor inconsistencies between the contents of the manual and the actual product itself due
to modifications which have been carried out on the product over time.
●
The contents of this manual are subject to change without notice.
●
Though extreme care has been taken in preparing this manual, if you find any ambiguous points or errors, or if
you would like to make any comments on the manual itself or its content, please contact us directly or,
alternatively, one of our authorized dealers.
• Microsoft
®
, Windows
®
are trademarks or registered trademarks of Microsoft Corporation in the United States and
other countries.
• Acrobat Reader and Adobe are trademarks of Adobe Systems Incorporated.
• “QR Code” and “Micro QR” are registered trademarks of DENSO Corporation “PDF417” is a registered trademark
of Symbol Technologies, Inc.
• “Maxi Code” is a registered trademark of United Parcel Service of America, Inc. “Data Matrix” is a registered
trademark of Data Matrix, Incorporated.
• Other company names and product names mentioned here are trademarks or registered trademarks of their
respective companies.
Summary of Contents for DURA PRINTER SL
