Nitto DURA PRINTER SL, Instruction Manual

Page: 27 / 98

BEFORE OPERATION
1-14
13
The uptake point of the label roll
is located.
Press the “ONLINE” button to make the
printer go offline. Then press the “FEED”
button several times.
*Check that the labels advance smoothly.
*
If a label size error occurs,
automatically adjust the label sensor.
For information on automatic adjustment of the label sensor, refer to the “DURA
PRINTER SL Setting Tool” manual.
1.5.2 Label sensor automatic adjustment
This section explains how to have the printer automatically adjust its own label sensor sensitivity.
This adjustment is carried out when a label roll with a different type of backing paper is used, the print position is not
adjusted correctly, or a label size error occurs repeatedly.
(It is also possible to adjust the label sensor automatically via the Setup Utility.)
1
Set the label roll so that a label is
positioned under the label
sensor.
2
Check that the printer is in online
mode, lock the arm unit, and
then turn on the printer.
The ONLINE light illuminates when the
printer is in online mode.
The label sensor
shown in the right
illustration is the
example when the
transmission sensor
is selected according
to the printer DIP
switches.