EN
Thank you very much for your purchase of this
NITTO KOHKI product
.
Before using your tool, please read this manual carefully so that you may use it properly to get the most out of it.
Please keep the manual handy - so you can use it whenever necessary.
Contents
Product Specific Safety Rules .............................. 1
1 Application ......................................................... 3
2 Checking Inside the Package ............................ 4
3 Part Names........................................................ 5
Electric screwdriver ...............................................5
Controller ..............................................................6
4 Specifications .................................................... 8
Screw joint ..........................................................10
Output torque graph ............................................11
5 Preparation ...................................................... 12
Attaching a bit .....................................................12
Attaching the suspension bail .............................12
Using the screwdriver with vacuum pickup/
mounted on an automatic screw fastening
machine ..............................................................13
Commercially available fixing tool mounting
position................................................................16
6 Basic Operation ............................................... 17
Start ....................................................................17
Changeover switch .............................................18
Start and stop......................................................19
Screw tightening .................................................20
Manual mode ......................................................21
7 Basic Settings .................................................. 22
Operation mode ..................................................22
Setting mode operation .......................................22
Initialization of settings ........................................24
8 Setting Mode Details ....................................... 25
Operations channel switching method
(No.1 CH-CHG) ...................................................25
Setting target channel (No.2 CH) ........................26
Screw fastening type (No.3 FSTN-TYPE)...........26
Torque (No.4 TORQUE) / Speed
(No.5 SPEED) .....................................................28
Soft start level (No.6 SOFT-START) ...................28
Fastening timer (No.7 FSTN-T) ..........................28
Count-up buzzer sound (No.8 COUNT UP-BZ) /
Fastening NG buzzer sound
(No.9 FSTN-NG-BZ) ...........................................30
Refastening prohibited timer
(No.10 REFSTN-T) .............................................30
Count function (No.11 COUNT-FNC) ..................31
Workpiece signal (No.12 WORK-SNSR) ............31
Count number (No.13 COUNT) ..........................31
Workpiece setup time (No.14 WORK-S-T) .........31
Screw fastening time lower limit value
(No.15 CRT-T-L) / Screw fastening time
upper limit value (No.16 CRT-T-U) ......................32
Screw fastening confirmation time
(No.17 OK-OUT-T) / OK output timing
(No.18 OK-TIMING) ............................................33
Operations OK buzzer sound (No.19 OK-BZ) /
Operations NG buzzer sound (No.20 NG-BZ) ....33
Count return function (No.21 COUNT-RTN) .......33
Buzzer sound volume (No.22 BZ-VOLUME) ......34
Check buzzer sound (No.23 CHECK-BZ) ...........34
Back light (No.24 BACK LIGHT) .........................34
Setting initialization (No.25 SETUP-RESET) ......34
9 Using External Signals .................................... 35
Specifications of signal terminal block ................35
External signal specifications ..............................38
Connection example of I/O signal .......................39
Using the workpiece signal .................................42
Resetting operation .............................................44
Operations channel switching .............................45
Use external signal to start up electric
screwdriver..........................................................45
Locking button or dial operations ........................46
10 Error Detection .............................................. 47
Detection of connection slip ................................47
Detection of motor startup error ..........................47
Detection of screw loosened lock .......................47
11 Appendix ........................................................ 48
When abnormalities have occurred
(Troubleshooting) ................................................48
Maintenance and inspection ...............................52
Disposal ..............................................................53
Separately-sold products ....................................53
External dimensions............................................55
LCD display list ...................................................57
Glossary ..............................................................59
Index ...................................................................62
Setting memo ......................................................63
TV07783-1_DLV10C_en.indb 2
2017/06/27 17:41:31
