7
EN
b
c
e
d
Name
Function
b
Signal terminal block
Provides each type of I/O signal, and service power source 24 V DC.
c
Receptacle
Connection cord is used to connect the electric screwdriver.
d
Inlet
Connects the power cord. Input the rated voltage.
e
Power switch
When in use set to the ON (
I
) side.
CAUTION
z
z
Do not apply a shock (such as dropping) or excessive load to the [SETTING] dial or signal terminal block.
Doing so could cause a failure.
LCD display
The status and setting content are displayed in the controller LCD.
Display example: Screw fastening mode
(during SOFT setting)
Display example: Screw fastening mode
(during HARD setting)
TV07783-1_DLV10C_en.indb 7
2017/06/27 17:41:33
