13
EN
Using the screwdriver with vacuum pickup/mounted on an
automatic screw fastening machine
WARNING
z
z
Before removing or mounting the coupling or vacuum pickup, always turn OFF the power.
You can mount the separately sold vacuum pickup.
In addition, mount to the tip an sleeve that matches the shape of the tightening screw, and use an vacuum pump to
adsorb the screw. The tube outward form applicable to the tube fitter is Ø6 mm.
Note that the flanged coupling for mounting on the automatic screw fastening machine is also old separately as
a single part. For the outward appearance drawing, see p. 56, and for the external startup control method, see
p. 45
.
CAUTION
z
z
The coupling mounting is “left-hand thread”. To prevent it from becoming loose during use, make sure to
properly attach it.
z
z
Be careful to avoid tightening the coupling too much.
Utilization
Operator hand-held
Mounting on automatic machine
Remarks
Screw adsorption
No
Yes
No
(Magnetized bit,
etc.)
Yes
Coupling
Standard parts
Adsorption coupling
DLW9014
(Accessory for
DLP6640)
Flanged coupling
DLW9015
(Single part sold
separately)
Flanged coupling
DLW9015
(Accessory for
vacuum pickup
DLP6650)
Left-hand
thread
Accent ring
(standard parts)
¡
¡
-
-
Vacuum pickup
(sold separately)
-
DLP6640
-
DLP6650
Sleeve
DLS4000 series
(sold separately)
-
¡
-
¡
Vacuum pump
DLP2570 (sold
separately)
-
¡
-
¡
TV07783-1_DLV10C_en.indb 13
2017/06/27 17:41:34
