www.usmotors.com
ID300/302 Integrated Motor Drive |
Mechanical Installation
21
• Failure to adhere to these recommendations can lead to premature wear of the bearings and void
the factory warranty.
All measures must be taken to ensure protection against the risks which arise when there are rotating
parts (coupling sleeve, pulley, belt, etc.).
•
If a motor is started up without a coupling device having been fitted, carefully secure the key in its
location.
•
Beware of back-driving when the motor is switched off. The appropriate precautions must be
taken:
• - For pumps, a non-return valve must be installed.
• - For mechanical devices, install a backstop or a holding brake, etc.
3.5.3 Coupling Methods
•
For further details on the different coupling methods, refer to the installation and maintenance
manual of
• 3 phase induction motors.
CAUTION
!
