Commander S100 User Guide
37
5 Getting started
This chapter covers the user interfaces, menu structure and security levels of the drive. There are three main ways to interface with the Commander
S100: by mobile app with Marshal, by PC with Connect, or by using the keypad.
5.1 Marshal mobile app
The fastest and easiest way to get the drive up and running is to use Marshal, a mobile app that takes the user through a simple step by step
commissioning process as well as providing access to detailed parameter descriptions and advanced drive diagnostics. Marshal is available for
download from the Google Play store or the App Store for apple devices. Use the QR code below for a quick link.
Marshal uses NFC technology to read and write data to and from the drive, so it is important that the mobile device used has this technology. To check
the device has NFC, open the "Settings app" and search for "NFC" or "Near Field Communication". NFC may need to be enabled on the device
before use.
5.1.1 Connecting with Marshal
To configure parameter settings with Marshal, the user must create or open a project. This can be done from the home screen by using the options
shown in Figure 5-1 below.
When Marshal prompts the user to scan the drive, the NFC antenna on the device must be held within 10 mm of the NFC logo above the drive
keypad. The NFC antenna is located in different locations depending on the device design and should be held against the top of the drive and moved
in a figure of 8 motion until the connection is successful.
Figure 5-1 Marshal homepage
MARSHAL
Summary of Contents for COMMANDER S100
Page 118: ...0478 0650 02...
