Commander S100 User Guide
7
2 Product information
2.1 Introduction
Commander S100 is a general-purpose drive that delivers maximum machine performance of induction motors for a range of applications. The
voltage and power rating of the drive should be chosen to suit the mains supply and the induction motor to be controlled.
The default setting of drive parameters have been selected for the majority of use cases but can be adjusted to optimize the drive for a specific
application.
2.2 Marshal commissioning and diagnostic app
The Marshal app provides a rich interface for commissioning, cloning, and monitoring the drive. Marshal includes simple tools and setup wizards to
configure the drive for an application and drive diagnostics.
Marshal is for use on smartphones and tablets that support NFC technology and is available from the Google Play store and the App Store. For
details on compatible phones and using Marshal to commission the drive see section 5.1
.
Features
Commissioning
• Power off or on commissioning (even in the box)
• FastStart - assisted commissioning. Only 4 key steps to get up and running
• Easy to use setup tools for: motor settings, speed control, PID controller and input/output (I/O) functions
• Pre-set application configurations
Cloning
• Parameters can be easily transferred from one drive to another - just tap to write to as many drives as you want
• Back-up and restore parameter files
Share
• Share parameter files via Outlook, OneDrive, WhatsApp etc
• Shared parameter files are compatible with Marshal and Connect (PC Tool)
• Export parameter files to PDF format
Offline capabilities
• Create new parameter files
• Open existing projects to review/change parameters
Diagnostics
• Diagnostics available with power off or on
• Get support with drive alarms
• Error log & active error diagnostics
• Compare parameter settings to the factory defaults
Monitoring and Security
• Quick view of parameter settings and drive status
• Parameter access can be restricted via a Security PIN
• Quick visualisation of I/O, motor, and speed settings
2.3 Model number
The way in which the model numbers for the Commander S100 are formed is illustrated below:
Figure 2-1 Model number
Other Variants
Identification Label
Derivative
Electrical Specifications
S100 -
03 4
2
Product Line
S100
Frame Size:
Voltage Rating:
Current Rating
:
Step
Drive
t
:
EMC Fil er Type
1 C1 Internal Filter
-
Regional
Defaults
A
0
0
0
0
Regional Defaults:
A - EMEA & APAC
B - America
C - LS
K - Customer Specific
Reserved:
3 -
Generation
Reference
0
Generation
Reference:
0 - 2021 Release
1 - 100 V (100 - 120 ± 10%)
2 - 200 V (200 - 240 ± 10%) 3 ph
4 - 400 V (380 - 480 ± 10%)
S
1 ph
- 200 V (200 - 240 ± 10%)
D
1 / 3 ph
- 200 V (200 - 240 ± 10%)
3 C3 Internal Filter
-
Summary of Contents for COMMANDER S100
Page 118: ...0478 0650 02...
