7
– English
EN
5
sec.
01
04
03
02
5
sec.
5
sec.
all
data
(*)
all
05
05
“0”
“1”
“H”
05
5
sec.
5
sec.
5
sec.
2
3
5
5
5
05
3
5
sec.
3
single
(transmitter
to be
deleted)
key example
3
5
4 OPTIONS
Note
– When performing the procedure, you can cancel it at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
(*) –
WARNING
– This deletion must be performed only when you want to adjust the limit switch heights again, using a different procedure than the one used previ-
ously. Whereas if you want to adjust heights with the same procedure, it is not necessary to delete them from memory.
5.10.2 - Procedure performed with an unmemorised transmitter
01.
Disconnect power supply from motor.
02.
Connect the White and White-black wires to each other.
03.
Disconnect power supply from motor.
04.
Lastly, perform the procedure indicated in paragraph 5.10.1.
white
white-black
OFF
ON
Paragraph 5.10.1
01
02
03
04
01
02
03
04
05
Note
– When performing the procedure, you can cancel it at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
5.11 - Locking and unlocking the memory
This procedure allows you to lock or unlock the memory to prevent accidental memorisation of other transmitters not included in the system.
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02.
Keep the
s
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03.
Keep the
n
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
04.
Keep the
s
and
t
keys pressed simultaneously and wait for the motor to perform 2 movements. Upon completion, release the keys.
05.
•
To unlock the memory:
Keep the
s
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
•
To unlock the memory:
Keep the
t
key pressed and wait for the motor to perform 5 movements. Upon completion, release the key.
04
05
05
5
sec.
5
sec.
5
sec.
5
sec.
01
03
02
5
sec.
5
sec.
2
3
3
2
3
5
Note
– When performing the procedure, you can cancel it at
any time by keeping the
n
and
t
keys pressed simultane-
ously for 4 seconds. Otherwise, do not press any key and
wait 60 seconds for the motor to perform 6 movements.
Paragraph 5.10.1
