EN
English –
10
6.
D -
Adjustment of “Wind” climate sensor
At the factory, the intervention threshold to is set at level 3 and to change it you must take the following steps:
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02.
Keep the
t
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03.
Briefly press the
s
key a few times, depending on the level you want to set for wind threshold:
1 press
= wind at 5 Km/h
2 presses
= wind at 10 Km/h
3 presses
= wind at 15 Km/h (factory settings)
*
4 presses
= wind at 30 Km/h
5 presses
= wind at 45 Km/h
After about 10 seconds, the motor performs the number of movements indicated by the level number selected.
Note
– If this does not occur, cancel the proce-
dure. this way, the adjustment is completed without changing the factory setting.
04.
Keep the
n
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
5
sec.
01
02
5
sec.
04
1
/
2
/
3
/
4
/
5
/
10
sec.
03
0,5
sec.
x 1
= vento a 5 Km/h
x 2
= vento a 10 Km/h
x 3
= vento a 15 Km/h (
*
)
x 4
= vento a 30 Km/h
x 5
= vento a 45 Km/h
5
sec.
3
2
?
3
Note
: • When performing the procedure, you can cancel it at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements. • If you use a sensor equipped with a “trimmer”, you must read the sensor instructions and ad
-
just the threshold directly on the sensor.
x 1
= wind at 5 Km/h
x 2
= wind at 10 Km/h
x 3
= wind at 15 Km/h (
*
)
x 4
= wind at 30 Km/h
x 5
= wind at 45 Km/h
6
.C - Programming the manoeuvre the motor should perform automatically when the
rain
sensor
signals the “presence of rain”
Before starting the procedure, move the awning to the mid-point of its stroke.
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02.
Keep the
t
key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
04. • To program the awning/shutter to be raised, if it starts to rain:
keep the
s
key pressed and wait for the motor to perform 3 movements.
Upon completion, release the key.
• To program the awning/shutter to be lowered, if it starts to rain:
keep the
t
key pressed and wait for the motor to perform 3 movements.
Upon completion, release the key.
04
04
5
sec.
5
sec.
5
sec.
01
03
02
5
sec.
2
3
3
2
5
sec.
3
=
=
Note
– When performing the procedure, you can cancel it at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
